Press release

Continuous Composites Demonstrates CF3D® Technology for Lockheed Martin and The Air Force Research Laboratory’s Wing Structure Design for Manufacturing (WiSDM) Project

Sponsored by Businesswire

Continuous Composites successfully completed the Air Force Research Laboratory’s two-year Wing Structure Design for Manufacturing (WiSDM) contract through Lockheed Martin (NYSE: LMT) to manufacture a Low Cost Attritable Aircraft (LCAA) wing. The project focused on a new structural design paradigm, when coupled with commensurate materials and manufacturing, to substantially reduce costs and lead times for attritable airframe structures. Continuous Composites’ patented Continuous Fiber 3D Printing (CF3D®) technology successfully printed the structural carbon fiber spars of the wing assembly. Structural performance was demonstrated when the completed wing box was statically tested and achieved 160% design limit load (DLL) before the compression skin buckled. The spars did not fail.

This press release features multimedia. View the full release here:

Low Cost Attritable Aircraft (LCAA) wing with CF3D® printed spars (Photo: Business Wire)

Low Cost Attritable Aircraft (LCAA) wing with CF3D® printed spars (Photo: Business Wire)

The program included a range of technologies focusing on innovative materials and manufacturing processes, including CF3D® to print the spars, long fiber injection molding for ribs, additively manufactured tooling, automated fiber placement for skins, autodrill and robotic assembly. More specifically, Continuous Composites printed two 8-foot-long, 4-pound, carbon fiber tapered C-channel spars. This novel approach to composites manufacturing features in situ impregnation, consolidation, and curing, resulting in significant cost and lead time reduction. The fully automated process features cutting and refeeding, enabling ply drops and variable part thickness within the structure.

The final wing assembly was delivered to the United States Air Force to undergo static load testing. The fully assembled wing was loaded to 160% of Design Limit Load. No measured or visual damage to the CF3D® printed spars was detected. The printed carbon fiber spars achieved a 60% fiber volume fraction with approximately 1% to 2% voids.

“The successful work with Continuous Composites and AFRL’s focus on CF3D® for this project not only advances new 3D printing technology but also offers the potential for aerospace-grade composite printing in high-performance industries,” says John Scarcello, Senior Manager, Lockheed Martin Skunk Works®. “We recognize this process is paving the way for broader applications within both defense and commercial applications, and Lockheed Martin plans to be part of that future of advanced manufacturing.”

Ray Fisher, Air Force Research Laboratory Program Manager, commented, “CF3D® presents an innovative manufacturing technology that shows great promise to be both low cost and agile to the production rate and responsiveness requirements to realize attritable airframe structures. The success of this LCAA project shows great opportunity for additive manufacturing with customized CF3D® material solutions that can orient structural fibers optimally. It is especially attractive to avoid expensive tooling in manufacturing aerospace structural parts. I look forward to additional opportunities to incorporate CF3D® in increasingly complex structures that are further optimized for attritable enabling production.”

“This project is one application where CF3D® showcases the significant cost reduction and design freedom while exceeding the stringent mechanical properties required for aerospace,” concludes Tyler Alvarado, Chief Executive Officer, Continuous Composites. “Our team is very appreciative to Lockheed Martin, the U.S. Air Force, and other partners for including CF3D® in this LCAA project. We are taking the next steps to select our long-term DoD prime partner while engaging the Air Force as evidenced by the upcoming announcements of our key involvement with AFRL PiCARD program in parallel to a five-year CRADA.”

About Continuous Composites

Continuous Composites, established in 2015 and headquartered in Coeur d’Alene, Idaho, owns the world’s earliest granted patents on Continuous Fiber 3D Printing (CF3D®). Offering the most advanced composites and additive manufacturing solution, CF3D® redefines mainstream manufacturing. The CF3D® process leverages the power of composite materials with a 3D printing process to reduce the high cost, long lead times, and design constraints found in traditional manufacturing. CF3D® elevates the use of composites by bringing tailorable, snap curing thermoset materials solutions to new applications. To learn more, visit